Computer Workstation Ergonomics

To understand the best way to set up a computer workstation, it is helpful to understand the concept of neutral body positioning. This is a comfortable working posture in which your joints are naturally aligned. Working with the body in a neutral position reduces stress and strain on the muscles, tendons, and skeletal system and reduces your risk of developing a musculoskeletal disorder (MSD). The following are important considerations when attempting to maintain neutral body postures while working at the computer workstation:

  • Hands, wrists, and forearms are straight, in-line and roughly parallel to the floor;

  • Head is level, forward facing, and balanced;

    • Generally it is in-line with the torso.

  • Shoulders are relaxed and upper arms hang normally at the side of the body;

  • Elbows stay in close to the body and are bent between 90 and 120 degrees;

  • Feet are fully supported by the floor or a footrest may be used if the desk height is not adjustable;

  • Back is fully supported with appropriate lumbar support when sitting vertical or leaning back slightly;

  • Thighs and hips are supported and generally parallel to the floor; and

  • Knees are about the same height as the hips with the feet slightly forward.

Regardless of how good your working posture is, working in the same posture or sitting still for prolonged periods is not healthy. You should change your working position frequently throughout the day in the following ways:

  • Make small adjustments to your chair or backrest;

  • Stretch your fingers, hands, arms, and torso;

  • Stand up and walk around for a few minutes periodically; and

  • Perform some of your tasks in standing: computing, reading, phone, meetings.

Select here for additional information >

Reference Postures

Upright Sitting Posture

The user's torso and neck are approximately vertical and in-line, the thighs are approximately horizontal, and the lower legs are vertical.

image.gif

Standing Posture

The user's legs, torso, neck, and head are approximately in-line and vertical with feet slightly apart. The user may also elevate one foot on a rest while in this posture.

image.gif

Declined Sitting Posture

The user's thighs are inclined with the buttocks higher than the knee and the angle between the thighs and the torso is greater than 90 degrees. The torso is vertical or slightly reclined and the legs are vertical. This position should not inhibit the ability to easily reach the keyboard or view the monitor.

image.gif

Reclined Sitting Posture

The user's torso and neck are straight and recline between 105 and 120 degrees from the thighs.

image.gif

Workstation Components

Select the buttons above to review additional ergonomic details for each workstation component

Work Processes and Recognition

The following link can provide you with possible risks from repetitive task:

Select here to view hazards and solutions that can be taken into consideration >

Workstation Environment

The following link provides general information on environmental conditions that help you throughout your workday:

Select here to view hazards and solutions that can be taken into consideration >


Have a question?